400-666-0005
CH EN

10kV amorphous alloy oil immersed transformer

Transformers can convert grid voltage into the voltage required by the system or load to achieve the transmission and distribution of electric energy. This transformer replaces the transformer with silicon steel core and is widely used in outdoor power distribution systems.

The large-scale grid operation of this product can achieve good energy-saving effects and reduce air pollution. This product is particularly suitable for areas with insufficient power, large load fluctuations, and difficult daily maintenance. Since the transformer adopts a fully sealed structure, the insulating oil and insulating medium are not polluted by the atmosphere, so it can operate in a humid environment. It is an ideal distribution equipment in the vast distribution network in cities and rural areas.

Ultra-low loss characteristics, energy saving, high power efficiency;

Has good harmonic resistance;

High overload capacity, high mechanical strength;

Low operating temperature, slow insulation aging, long service life;

Superior performance, safe, reliable and environmentally friendly products;

Fast investment recovery benefits.


  • Usage environment

  • Model and meaning

    图片2.png

Technical Parameter

图片3.png

Structural characteristics

变压器铁芯采用非品合金带材卷制页成,空载损耗比59型变压器降低80%左右,比JB/T10318规定值低25%左右;低压采用钢箔线圈,增强变压器承受短路的能力;联结组采用Dyn11,减少谐波对电网的形响,改善供电质量;油箱和箱盖焊为一体的全密封结构,延长使用寿命,免维修;变压器采用真空注油,可完全排除线圈中气泡,确保绝缘性稳定;每台变压器出厂前都进行峰值电压高于国家标准25%的全波雷电冲击实验,确保变压器安全可靠运行。

Structural diagram
Configuration diagram

Scan QR code
Follow Huanghua Group

Contact Us

wm@huanghua.com cc@huanghua.com